Installing data logger on free Easylog Cloud

Thank you for your purchase of a EL-WIFI data logger with a free EasyLog Cloud account (for a maximum of one logger).

Follow the steps below to correctly install and configure your device.

1. Your EasyLog Cloud account

To use your logger, you need a EasyLog Cloud account.

Don't have an account yet? You can create one during installation (see instructions below).

Note: this concerns the free EasyLog Cloud, not the professional Tempro EasyLog Cloud environment.

2. Preparation

Ensure that:

• there is a 2.4GHz WiFi network available;
• you know the WiFi password (no spaces or special characters);
• TCP port 14354 is open for outgoing traffic.

This is usually allowed by most routers.

If you are using a business network, please check with your IT department whether TCP port 14354 is open for outgoing connections.

3. Installatie via smartphone

Stap-voor-stap

1. Download de EasyLog Cloud App via de App Store (iOS) of Google Play Store (Android).
2. Log in met uw bestaande EasyLog-account.
   • Heeft u nog geen account? Klik dan op “Forgot password”, daarna op “Sign in” en vervolgens op “Sign up now” om er één aan te maken.
3. Schakel mobiele data (4G/5G) uit op uw smartphone in de netwerk-instellingen.
4. Open opnieuw de EasyLog Cloud App.
5. Tik linksboven op de drie horizontale streepjes (menu).
6. Kies “Setup Device”.
7. Selecteer “EL-WiFi”.
8. Volg de verdere stappen die op het scherm verschijnen.

Na de installatie kunt u de logger terugvinden onder “New Devices” en deze vervolgens op de gewenste locatie plaatsen.

4. Installatie via Windows-computer of laptop

1. Download de installatie­software via deze link:
   Download WiFi Sensor Software
2. Open de software op uw computer.
3. Maak uw gratis STARTER-account aan door op “Sign up” te klikken en de stappen te volgen.
4. Log vervolgens in op de Cloud via “Sign in” with your email address and password.
5. Click on “Set-Up Device” and then on “On The Cloud”.
6. Connect the logger via USB to your computer.
7. Ensure that the logger and the computer are within range of the WiFi network that you want to use.

   A strong WiFi signal is important to limit battery consumption.

8. Select the correct WiFi network and enter the password. Click on Next.
9. The logger will now connect to the network.
10. You can then set the parameters, such as:
    • the name of the logger;
    • the type of external probe (see white indication on the sensor cable).
      Then click on Next.
11. The logger will save the settings and connect to the Cloud.

✅ The installation is now complete!

You can view the logger in your Cloud account or in the mobile app.

Here you can monitor the temperature, set alarms, and change parameters.

5. Troubleshooting

If the logger does not connect to the Cloud, please read the following blog post:

SET UP FAIL

6. Upgrade to a professional account

Do you want to:

• manage multiple loggers on one account?
• add multiple users/logins to one account? 
• set up multiple locations?
• unlimited (>45 days) data logging and storage capacity?

Then contact us via mail@tempro.be for a professional EasyLog Cloud licence or SHOP PROFESSIONAL CLOUD LICENCE